Freeze Dry Creator S models
Congratulations on your purchase of our Freeze Dry System, which is designed for laboratory lyophilization procedures. The refrigerant used in the refrigeration system is CFC-free so it will not endanger the environment. The unit is easy to install and maintain. Proper care
and maintenance of this product will result in many years of dependable service.
This manual is designed to help you learn how to install, use, and maintain your Freeze Dryer. Instructions for performing routine maintenance and making minor modifications to your Freeze Dryer are also included.
Before you install your Freeze Dryer, you need to prepare your site for installation. Carefully examine the location where you intend to install your Freeze Dryer. You must be certain that the area is level and of solid construction. An electrical source must be located near the installation site.
The Freeze Dryer requires a dedicated electrical outlet. This outlet requires a 25 Amp circuit breaker or fuse is required for models rated at 220V-230V (50 Hz/60HZ). The power cord on 220-230V models are equipped with a plug on the power cord. It will be necessary to change a plug to match the available receptacle.
Creator 1S Required 1.8kw(50/60hz，220V-240V)
Creator 2S Required 2.6kw(50/60hz，220V-240V)
Creator 2S Max Required 3.2kw (50/60hz，220V-240V)
Creator 3S Required 2.6kw(50/60hz，220V-240V)
Creator 3S Max Required 3.2kw (50/60hz，220V-240V)
Creator 4S Required 3.5kw(50/60hz，220V-240V)
Creator 4S Max Required 3.5kw (50/60hz，220V-240V)