Command SJ-300F

Overview：

Command OS2.1 control system was developed to meet the lyophilization requirements of today’s pharmaceutical and biotechnology applications.
The system packs the highest level process_x0002_control and flexibility into a software package that is as easy to use as it is multi-functional.
The SCADA system solution to deliver superior functionality, as well as faster, more intelligent control of the freeze-drying process and related functions.

Key Features：

Graphical synoptic display with real-time system status. Full system alarming. Historical data trending, with quick export capability. Power outage protection including product recovery routines. Comprehensive programming of unlimited custom recipes. Semiautomatic and fully automatic modes of operation. Available optional features include automatic Batch Reports

21 CFR Part 11 Compliance CapabilitiesE-Signatures attached to all recipe changes. Secure Database alarms and events database. Proficy Historian for secured historical data archiving. Full security integration with the Microsoft Windows operating system environment

Specification

1.Command SJ-300F(T)

Manufacture Standards
A. Chamber
		Name	Model/Specifications/Material		Number
01		Chamber	AISI 304L /316L		1
2		Shelves	AISI 304L /316L		1Set
	500× 800mm			8+1
3		Chamber Door	Acrylic or stainless door		1
4		Product temperature sensors	Pt-100		8
5		Temperature sensors(thermal fluid)	Pt-100		2
6		Chamber material	AISI 304L /316L		1
Performance parameters
1		Finish	Ra≤0.4µm
2		Level	0.5mm/m
3		Shelves temperature Min	＜-60℃
4		Shelves temperature Max	+65℃
5		Shelves temperature uniformity	±1°C(after balance)
6		Shelf cooling time (without load)	+20 ～ -40°C ≤ 60 minutes
7		Shelves Distance	100mm(stopper 70mm）
8		Chamber type	Rectangular
9		Insulation	B1 Cotton insulation
10		Door Open direction	Left or right
11		Sealing strips for doors	Silicon rubber
B. Condenser (with coiled pipe)
SN		Name	Model/Specifications/Material		Number
1		Condenser	AISI 304 ,316 optional		1
2		Condenser coiled pipe	Coil inside		1
3		Temperature sensors(condenser)	Pt-100		1
4		Defrost	water soaking defrosting
Performance parameters
5		Coiled temperature	≤-85℃
6		Condenser cooling time(without load)	+20 ～ -40°C ≤ 30 minutes
D Refrigeration system
SN		Name	Model/Specifications/Material		Number
1		Compressor	Frascold 6HP		2
2		Refrigerant	R507A +R508B
3		Oil separator	Emerson		1
5		Automatic protective device for pressure	DANFOSS		2
6		Pressure meter	REFCO		3
7		Expansion valve	DANFOSS		3
E Vacuum system
SN		Name	Model/Specifications/Material		Number
1		Vacuum pump	DRV90		1
2		Isolation valve of pump well	Electric valve		1
3		Vacuum Sensor	Posifa		2
4		CM sensor	optional for Chamer
Performance parameters
1		Lowest vacuum pressure	<=1Pa
2		Evacuation time	From atm to 10pa≤30min
3		Leakage rate	5×10-3pa.m3/sec
G Circulation system
SN		Name	Model/Specifications/Material
1		Circulation pump	Low temperautre magnetic pump			1
2		Thermal fluid	5cs,USA Dowcorning Silicon oil (low viscosity)
3		Heater	2000w			2
4		Plate heat exchanger				2
Performance parameters
1		Heating speed	1°C/min
Electric control system
SN		Name	Model/Specifications/Material
1		Electric standard	IEEE		／
2		PLC	Simens S7-200		1
3		Breaker	schneider		／
4		AC contactor	schneider		／
8		Control type	Manual and automatic
Software function
1		Freeze drying (switch the type between manual and automatic randomly)
2		Technique setting (recipe management)
3		Select Scada soft 21 CFR Part 11 Compliance CapabilitiesE-Signatures attached to all recipe changes.

1	Power requirement	25Kw (380V,-440v 50Hz/60hz, 3Phase)or 220-240v 60hz 3phase
2	Machine construction	Wall mounted ,GMP type
3	Weight (appox)	2500kg
4	Cooling requirement	water cooling(if pipe size is 1 inch,water pressure 2.5bar-3.5bar),Temperature <25C
Verification documents system The details of verification documents system
	Operation manual	1
	Wiring drawing	1
	PQ,OQ,IQ Document	1

Picture for reference

image.png