Command 20-50F(T)En

Overview：

Command OS2.1 control system was developed to meet the lyophilization requirements of today’s pharmaceutical and biotechnology applications.
The system packs the highest level process_x0002_control and flexibility into a software package that is as easy to use as it is multi-functional.
The SCADA system solution to deliver superior functionality, as well as faster, more intelligent control of the freeze-drying process and related functions.

Key Features：

Command 20F(T)

A
SN	Name	Model/Specifications/Material	Number
1	Chamber	AISI 304L /316L	1
2	Shelves	AISI 304L /316L	1
	Shelf Size	300 x 400	2+1
3	Chamber Door	Acrylic or stainless door	1
4	Door lock system with safe bolt		1set
5	Product sensors	Pt-100	2
6	Temperature sensors(thermal fluid)	Pt-100	1
Performance parameters
1	Finish	Ra≤0.4µm
2	Level	0.5mm/m
3	Shelves temperature Min	＜-60℃
4	Shelves temperature Max	+65℃
5	Shelves temperature uniformity	±1°C(after balance）
6	Spacing	100mm (Top stopper type is 80mm)
7	Chamber type	Rectangular
8	Insulation	B1 Cotton insulation
9	Open direction	Left or right
10	Sealing strips for doors	Silicon rubber
B Condenser (with coiled pipe)
SN	Name	Model/Specifications/Material	Number
1	Condenser	AISI 304 ,316 optional	1
2	Condenser coiled pipe	Coil inside or round type(coil outside)	1
3	Temperature sensors(condenser)	Pt-100	1
Performance parameters
5	Coiled temperature Min	≤-85℃
	ice capacity in 24hour	4kg
6	Condenser frosting capacity	Max 6kg / batch
7	Condenser type	round
D Refrigeration system
SN	Name	Model/Specifications/Material	Number
1	Compressor model and number	1HP Embraco	2
2	Refrigerant	R507+R508B	Right quantity
3	Oil separator	Emerson / similiar type	1
5	Automatic protective device for pressure	DANFOSS	2
7	Pressure meter	REFCO or similiar type	3
8	Expansion valve	DANFOSS	4
Performance parameters
1	Shelf cooling time (without load)	+20 ～ -40°C ≤ 60 minutes
2	Condenser cooling time(without load)	+20 ～ -40°C ≤ 30 minutes
E Vacuum system
SN	Name	Model/Specifications/Material	Number
1	Vacuum pump	DRV10 (10m³ /h)	1
2	Isolation valve of pump well	Electric valve	1
3	Vacuum gauge	Posifa	2
Performance parameters
1	Final vacuum	< =1Pa
2	Evacuation time	From atm to 20pa≤30min
3	Leakage rate	5×10-3pa.m3/sec
G Circulation system
SN	Name	Model/Specifications/Material
1	Circulation pump	Grundfos
2	Thermal fluid	5cs,USA Dowcorning Silicon oil (low viscosity)
3	Heater	500w
4	Plate heat exchanger
5	Temperature sensors(thermal fluid)	Pt-100
Performance parameters
1	Heating rate	1°C/min
K Electric control system
SN	Name	Model/Specifications/Material	Number
1	Electric standard	IEEE
2	PLC	Simens S7-200	1
3	Breaker	schneider
4	AC contactor	schneider
Control type		Manual and automatic
Software function
1	Freeze drying (switch the type between manual and automatic randomly)
3	Technique setting (recipe management)
L Utility list
1	Electricity-total electrical load	4Kw (380V, 50Hz, 3Phase) or 220V-240V 3 phase or 110V 220v single phase
The equipment’s main technique parameter
1	Machine construction	Wall mounted ,GMP type
2	Weight (appox)	310 kg
3	Gross weight (appox)	380kg
4	Package size	850 x 1450 x 1480 mm
5	Capacity of raw material for freeze drying(suggestive value)	2.4 kg/batch
Document
SN	Name		Number
1	Operation manual		1
2	Maintenance manual		1
3	Wiring drawing		1
4	Instruction for the main parts		1
5	PQ,OQ,IQ Document		1

Command 30F(T)

| --- | --- | --- | --- |

Command 50F(T)

| --- | --- | --- | --- |

Picture

Command 20F-30F(T) size

Command 50F(T) Picture